厌氧发酵系统中回流沼液的产甲烷活性研究

为确定两阶段厌氧发酵系统合理的污泥回流时段,对厌氧发酵系统排出沼液产甲烷活性进行了研究。通过对这些沼液在后储罐放置的不同天数(0~5 d)测定其不同的活性,用间歇实验方法测定最大比产甲烷活性(Um ax.CH4)作为厌氧污泥的产甲烷活性指标。结果表明,排出的沼液产甲烷活性在不同的时间段有所不同,经实验得出沼液放置第2 d时的产甲烷活性最高,从而确定该两阶段厌氧发酵系统排出污泥合理的回流时段应该是沼液进入后储罐的第2 d。进而为在线活性污泥与后储罐最佳活性时段污泥混合的污泥回流工艺提供理论依据。     

畜禽沼液中抗生素和激素的微波处理

通过间歇处理和连续处理实验，探讨微波技术对沼液中四环素类抗生素和激素喹乙醇去除的效果。结果表明，沼液在微波间歇处理中，最优反应时间为40min。此条件下沼液中喹乙醇、土霉素、四环素和金霉素的去除率分别达到26％、49％、48％和70％；微波可显著提高可生化性，BOD5／COD值达到0．37。微波一好氧处理系统中COD与氨氮的去除率分别达到91％和93％，明显优于单独好氧处理。沼液微波连续处理中，最优HRT为90min，此时喹乙醇、土霉素、四环素和金霉素的去除率分别达到24％、45％、50％和74％；BOD5／COD值达到0．34。微波．好氧处理系统中COD与氨氮的去除率均为90％，优于单独好氧处理效果。     

烟气脱硫剂制浆系统一体化设计及应用

石灰石粉制浆系统是石灰石-石膏湿法烟气脱硫工艺中脱硫剂浆液干式制备系统的一个主要部分。针对石灰石粉制浆系统传统设计的不足,提出了石灰石浆液罐与粉仓一体化设计的优化方案,具有节省投资、占地小、设计简单紧凑、系统可靠和寿命长的优点,尤其适合我国老小燃煤机组烟气脱硫改造工程。目前已成功应用于多个烟气脱硫工程。     

厌氧-好氧生物反应器填埋工艺特性研究

基于生物反应器填埋技术,研究1种填埋场地循环操作的厌氧-好氧生物反应器填埋工艺,设计了该工艺模拟装置并研究了其运行工艺特性.厌氧阶段主要通过渗滤液回灌控制反应器工艺条件,主要试验结果为,pH值,R1在 6周后可上升至6.7～7.8,R2在17周内一直低于6.8;渗滤液COD浓度,R1在13周时下降至10?617 mg/L,R2在5周后上升至60?000 mg/L后长期趋于稳定;填埋气累计产量,R1在8周达到44%,R2几乎不产气.衡量稳定化可以分别采用渗滤液pH、COD浓度及BOD₅/COD的减少率、填埋气的累计产率等指标来判断,并据此转换为好氧填埋运行.好氧阶段主要是通过强制通风来减少恶臭和水分,主要试验结果为,通风19d氨气浓度降为1.16 mg/m³,通风23d后恶臭浓度降为19;通风14d后含水率降为26%.完成此阶段的工艺指标值可依据矿化垃圾开采的最终用途确定.对主要试验数据进行了数值模拟.厌氧-好氧填埋过程的微生物演替经RISA分析,有4个优势菌群,一些兼性菌群在厌氧-好氧阶段起着重要的承前启后作用.     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.     

从COD测定废液中回收银

研究从COD测定的废液中回收银的工艺.在废液中分离出氯化银,经洗涤后加锌置换,还原为银.该工艺简便易行,原材料普通易得.适用于实验室及工业生产的应用.回收银的纯度可达99％以上.     

沼液复合型杀虫剂的田间应用试验研究

通过沼液复合型杀虫剂的田间应用试验,对各种沼液复合型杀虫剂的抗病防虫性能进行了深入研究.在大田应用条件下测试了沼液复合型杀虫剂的杀虫效果.结果表明,该沼液复合型杀虫剂对蚜虫的毒杀作用均比较明显.为了推进沼液复合型杀虫剂的商业化进程,提出便于其田间应用的各种最佳配比浓度,即BP01号、BP02号、BP03号、BP04号、BP05号沼液复合型杀虫剂抗病防虫性能最佳的配比分别为9 500倍液、26000倍液、11 667倍液、22 000倍液和13 333倍液.     

不同波段紫外光在TiO2悬浊液中的消光特点

为确定TiO₂催化剂悬浊液对不同波段紫外光的消光规律,本试验以4-CBA-Na为模型污染物,针对催化剂/污染物悬浊液体系在不同催化剂投加量下,对UVA、UVB和UVC波段光子的消光效果进行了测定.结果表明,各悬浮体系对各波段紫外光的消光基本上符合比耳定律,即随着入射光程的增加,光强呈现负指数衰减;紫外光在催化剂悬浊液中的消光系数随催化剂投加量的增大而增加,其增加规律可以用二次多项式表示;污染物溶液本身对UVB和UVC紫外光有吸收,UVB和UVC紫外光在催化剂-污染物悬浮体系中的消光系数可视为污染物与催化剂颗粒的消光系数之叠加.催化剂悬浊液对紫外光的消光系数随紫外光波长的减小而增大,这意味着使用短波长的UVC作为光催化降解光源可以提高能量利用效率.